- 浏览: 1610789 次
文章分类
最新评论
-
Top_raine:
,求Java大神,负责移动警务项目,熟悉MQTT、XMPP、 ...
位置服务LBS -
OHdream:
虽然不知道你是不是拷贝的,但是问下你这个方法真得有用吗?你自己 ...
eclipse+lomboz配置说明 -
soutnila:
如果你使用的是jquery1.6以上的版本你应该使用prop( ...
Jquery 获取checkbox的checked问题
Win95下的注册表文件(User.dat,System.dat)文件格式说明
Windows registry files
agreement: ==========
the author of this document will not be responsible for any damage and/or license violation that may occur. the information within this document is provided "as is" without warranty of any kind... this information was "collected" during sleepless nights, and is not officially released by microsoft! it shall give you a peek at the windows(tm) internals to give you a chance to recover from corrupted data.
the author has nothing to do with microsoft, except that he uses their products...
if you don't agree with this, stop reading this document, and delete it at once!
history: ========
what is the registry? where did it came from? two questions, which i will try to answer here. the registry is a database (at least microsoft thinks so:) which contains configuration information about the system. it mainly is a memory dump which is saved to one or more files on the windows host drive. it is loaded every system-boot and remains resident until shutdown. since parts of it are not used during normal operation it will be swapped out very soon. the registry appeared with windows 3.?? (sorry, i can't remember any earlier version :-), where it was used for file associations and the "ole" functions (the conection between ole-id's and the applications). this is a critical information and since the registry has (almost) no checksum information (!), it sometimes gets corrupted. this is the main reason for this doc.
using windows 3.x, almost every configuration was done using good old ".ini"- files, which were readable but slow and limited in size (64k). in windows 95 (and nt), the registry was used instead of these files. so, to edit a particular setting, you would have to run the application which manages these settings. :( but what if this app won't start? ms included a tool named regedit in windows 3.?? and 95, and a regedt32 in windows nt. you can use these apps to edit all contents of the registry (in windows nt the registry supports security, as well as it provides the security for the whole system!)
an application can open a "key", write values (variables) to it and fill them with data. each key represents also a value called "default" and can contain any number of sub-keys. this will form a tree-structure as you can see at the left half of regedit. (note: regedit from windows 3.?? has to be started with /v or /y, i can't remember now)
where can i find the registry??? ================================
that differs for each windows-version:
version file(s) contents 3.1x reg.dat complete windows 3.?? registry
95 system.dat system-values (hkey_local_machine) user.dat user-values (hkey_users)
nt system32/config/sam sam-part of the registry (=nt security) system32/config/software software-specific part (hkey_local_machine/software) system32/config/system system-specific part (hkey_local_machine/system) profiles/%username%/ntuser.dat user-specific part (hkey_current_user/{s-1-xxx...}) profiles/%username%/ntuser.man like ntuser.dat but a mandatory-profile
if you are using a roaming-profile with windows nt, ntuser.xxx can be on a network-share as well...
terms =====
the registry consists of the following elements:
hive: strating point of the structure. the name of an hive starts with the "hkey_"-prefix. can be seen as a "drive" in a file system.
hive name beschreibung 3.1 95 nt4 hkey_classes_root points to the "class" key in the "hkey_local_machine" hive, the only hive in windows 3.?? x x x
hkey_current_user information and settings valid for the currently logged in user. (points to the correct x x key under "hkey_users")
hkey_current_config settings for the currently active hardware profile. points to "hkey_local_machine/ x x control/controlsetxxx
hkey_users contains all currently active user settings. since nt is a single user system, there will be only one key (the s-id x x of the active user), and a ".defualt" key (the settings for the ctrl-alt-del environment)
hkey_localmachine all local settings x x
hkey_dyn_data as the name says, here you'll find x dynamic data (cpu-usage,...)
key: a key to the registry can be seen as a directory in a file system. value: can be seen as the registrys "file" data: is the actual setting, can be seen as the contents of a file
windows 3.x ===========
this registry is the easiest one. it consists of 3 blocks, which are not "signed" at all:
block position size header 0 32 bytes navigation-info 0x00000020 ??? data-block ??? ???
the "???" marked values can be read from the header.
header ======
offset size description 0x0000 8 byte ascii-text: "shcc3.10" 0x0008 d-word ? 0x000c d-word ? (always equal the d-word at 0x0008) 0x0010 d-word number of entrys in the navigation-block 0x0014 d-word offset of the data-block 0x0018 d-word size of the data-block 0x001c word ? 0x001e word ?
values marked "?" are not important for a read-access, and therefore unknown to me...
navigation-block ================
this is where chaos rules! it consists of two different, 8 byte long blocks:
* navigation-info-record, * text-info-record
the first record in the navigation block is a navigation info record.
navigation-info-record
offset size contents 0x00 word next key (same level) 0x02 word first sub-key (one level deeper) 0x04 word text-info-record key-namens 0x06 word text-info-record key-value (default)
the values are the locical number of the block inside the file:
offset=blocksize*blocknumber+headersize
since 2 of this values are constant:
offset=8*blocknumber+0x20
text-info-record ================
offset size contents 0x00 word ? 0x02 word number of references to this text 0x04 word text-length 0x06 word offset of the text-string inside the data-block
to get the text-offset inside the file you have to add this offset to the data-offset inside the header.
data-block ==========
the data-block only consists of a collection of text-strings. right in front of every text is a word which may or may not have a meaning. the offset in the text-info record points directly to the text, the text-size has to be defined in the text-info record too.
windows 95 ==========
the windows95-registry files:
inside the windows-directory (default: c:/windows) are 2 files which are loaded to form the registry:
system.dat
and
user.dat
this files are mapped to the following hives:
hkey_local_machine in system.dat
and
hkey_users in user.dat
the file structure: ===================
both files have the same structure. each of them consists of 3 blocks where 1 of these blocks can be repeated. every block has a 4 byte long signature to help identify its contents.
id block-contents max. size creg header 32 bytes @ offset 0 rgkn directory information (tree-structure) ??? @ offset 32 rgdb the real data (values and data) max. 65535 bytes an offset ??
these blocks are "sticked together" with no space between them, but always a multiple of 16 in size.
the creg-block ==============
offset size inhalt 0x00000000 d-word ascii-"creg" = 0x47455243 0x00000008 d-word offset of 1st rgdb-block 0x00000010 d-word # of rgdb-blocks
all other values are not needed to read the registry...
the rgkn-block ==============
i assume that rgkn stands for registry-key-navigation. this block contains the information needed to built the tree-structure of the registry. this block will be larger then 65536 bytes (0xffff)!
all offset-values are relative to the rgkn-block!
offset size contents 0x00000000 d-word ascii-"rgkn" = 0x4e4b4752 0x00000004 d-word size of the rgkn-block in bytes 0x00000008 d-word rel. offset of the root-record 0x00000020 ???? tree-records (often the 1st record)
the tree-record ===============
the tree-record is a "complete" registry-key. it contains the "hash"-info for the real data stored in this key.
offset size contents 0x0000 d-word always 0 0x0004 d-word hash of the key-name 0x0008 d-word always -1 (0xffffffff) 0x000c d-word offset of the owner (parent)-records 0x0010 d-word offset of the 1st sub-sey record 0x0014 d-word offset of the next record in this level 0x0018 d-word id-number of the real key
the 1st entry in a "usual" registry file is a nul-entry with subkeys: the hive itself. it looks the same like other keys. even the id-number can be any value.
the "hash"-value is a value representing the key's name. windows will not search for the name, but for a matching hash-value. if it finds one, it will compare the actual string info, otherwise continue with the next key.
end of list-pointers are filled with -1 (0xffffffff)
the id-field has the following format:
bits 31..16: number of the corresponding rgdb-blocks bits 15..0: continuous number inside this rgdb-block.
the hash-method: ================
you are looking for the key: software/microsoft
first you take the first part of the string and convert it to upper case
software
the "/" is used as a seperator only and has no meaning here. next you initialize a d-word with 0 and add all ascii-values of the string which are smaller than 0x80 (128) to this d-word.
software = 0x0000026b
now you can start looking for this hash-value in the tree-record. if you want to modify key names, also modify the hash-values, since they cannot be found again (although they would be displayed in regedit)
the rgdb-block ==============
header:
offset size contents 0x0000 d-word ascii-"rgdb" = 0x42444752 0x0004 d-word size of this rgdb-block 0x0020 ???? rgdb records
rgdb-record (key-information) =============================
offset size contents 0x0000 d-word record length in bytes 0x0004 d-word id-number 0x0008 d-word ??? size ??? 0x000c word text length of key name 0x000e word number of values inside this key 0x0010 d-word always 0 0x0014 ???? key-name 0x???? ???? values
the first size (record length) can be used to find the next record. the second size value is only correct if the key has at least one value, otherwise it is a little lower.
the key-name is not 0-terminated, its length is defined by the key- text length field. the values are stored as records.
value-record ============
offset size contents 0x0000 d-word type of data 0x0004 d-word always 0 0x0008 word length of value-name 0x000a word length of value-data 0x000c ???? value-name 0x???? ???? data
data-types ==========
value contents 0x00000001 regsz - 0-terminated string (sometimes without the 0!) 0x00000003 regbin - binary value (a simple data-block) 0x00000004 regdword - d-word (always 4 bytes in size)
windows nt (version 4.0) ========================
whoever thought that the registry of windows 95 and windows nt are similar will be surprised! they only look much the same, but have completely other structures! since the rgdb-blocks in the windows 95 registry are not larger than 0xffff, we can see that it is optimized for a 16-bit os... windows nt stores its registry in a page-oriented format with blocks of 4kb (4096 = 0x1000 bytes)
the windows nt registry has 2 different blocks, where one can occure many times...
the "regf"-block ================
"regf" is obviosly the abbreviation for "registry file". "regf" is the signature of the header-block which is always 4kb in size, although only the first 64 bytes seem to be used and a checksum is calculated over the first 0x200 bytes only!
offset size contents 0x00000000 d-word id: ascii-"regf" = 0x66676572 0x00000004 d-word ???? 0x00000008 d-word ???? always the same value as at 0x00000004 0x0000000c q-word last modify date in winnt date-format 0x00000014 d-word 1 0x00000018 d-word 3 0x0000001c d-word 0 0x00000020 d-word 1 0x00000024 d-word offset of 1st key record 0x00000028 d-word size of the data-blocks (filesize-4kb) 0x0000002c d-word 1 0x000001fc d-word sum of all d-words from 0x00000000 to 0x000001fb
i have analyzed more registry files (from multiple machines running nt 4.0 german version) and could not find an explanation for the values marked with ???? the rest of the first 4kb page is not important...
the "hbin"-block ================
i don't know what "hbin" stands for, but this block is always a multiple of 4kb in size.
inside these hbin-blocks the different records are placed. the memory- management looks like a c-compiler heap management to me...
hbin-header ===========
offset size contents 0x0000 d-word id: ascii-"hbin" = 0x6e696268 0x0004 d-word offset from the 1st hbin-block 0x0008 d-word offset to the next hbin-block 0x001c d-word block-size
the values in 0x0008 and 0x001c should be the same, so i don't know if they are correct or swapped...
from offset 0x0020 inside a hbin-block data is stored with the following format:
offset size contents 0x0000 d-word data-block size 0x0004 ???? data
if the size field is negative (bit 31 set), the corresponding block is free and has a size of -blocksize! the data is stored as one record per block. block size is a multiple of 4 and the last block reaches the next hbin-block, leaving no room.
records in the hbin-blocks ==========================
nk-record
the nk-record can be treated as a kombination of tree-record and key-record of the win 95 registry.
lf-record
the lf-record is the counterpart to the rgkn-record (the hash-function)
vk-record
the vk-record consists information to a single value.
sk-record
sk (? security key ?) is the acl of the registry.
value-lists
the value-lists contain information about which values are inside a sub-key and don't have a header.
datas
the datas of the registry are (like the value-list) stored without a header.
all offset-values are relative to the first hbin-block and point to the block- size field of the record-entry. to get the file offset, you have to add the header size (4kb) and the size field (4 bytes)...
the nk-record =============
offset size contents 0x0000 word id: ascii-"nk" = 0x6b6e 0x0002 word for the root-key: 0x2c, otherwise 0x20 0x0004 q-word write-date/time in windows nt notation 0x0010 d-word offset of owner/parent key 0x0014 d-word number of sub-keys 0x001c d-word offset of the sub-key lf-records 0x0024 d-word number of values 0x0028 d-word offset of the value-list 0x002c d-word offset of the sk-record 0x0030 d-word offset of the class-name 0x0044 d-word unused (data-trash) 0x0048 word name-length 0x004a word class-name length 0x004c ???? key-name
the value-list ==============
offset size contents 0x0000 d-word offset 1st value 0x0004 d-word offset 2nd value 0x???? d-word offset nth value
to determine the number of values, you have to look at the owner-nk-record!
der vk-record =============
offset size contents 0x0000 word id: ascii-"vk" = 0x6b76 0x0002 word name length 0x0004 d-word length of the data 0x0008 d-word offset of data 0x000c d-word type of value 0x0010 word flag 0x0012 word unused (data-trash) 0x0014 ???? name
if bit 0 of the flag-word is set, a name is present, otherwise the value has no name (=default) if the data-size is lower 5, the data-offset value is used to store the data itself!
the data-types ==============
wert beteutung 0x0001 regsz: character string (in unicode!) 0x0002 expandsz: string with "%var%" expanding (unicode!) 0x0003 regbin: raw-binary value 0x0004 regdword: dword 0x0007 regmultisz: multiple strings, seperated with 0 (unicode!)
the "lf"-record ===============
offset size contents 0x0000 word id: ascii-"lf" = 0x666c 0x0002 word number of keys 0x0004 ???? hash-records
hash-record ===========
offset size contents 0x0000 d-word offset of corresponding "nk"-record 0x0004 d-word ascii: the first 4 characters of the key-name, padded with 0's. case sensitiv!
keep in mind, that the value at 0x0004 is used for checking the data-consistency! if you change the key-name you have to change the hash-value too!
the "sk"-block ==============
(due to the complexity of the sam-info, not clear jet)
offset size contents 0x0000 word id: ascii-"sk" = 0x6b73 0x0002 word unused 0x0004 d-word offset of previous "sk"-record 0x0008 d-word offset of next "sk"-record 0x000c d-word usage-counter 0x0010 d-word size of "sk"-record in bytes ???? ???? ???? security and auditing settings... ????
the usage counter counts the number of references to this "sk"-record. you can use one "sk"-record for the entire registry!
windows nt date/time format ===========================
the time-format is a 64-bit integer which is incremented every 0,0000001 seconds by 1 (i don't know how accurate it realy is!) it starts with 0 at the 1st of january 1601 0:00! all values are stored in gmt time! the time-zone is important to get the real time!
common values for win95 and win-nt ==================================
offset values marking an "end of list", are either 0 or -1 (0xffffffff). if a value has no name (length=0, flag(bit 0)=0), it is treated as the "default" entry... if a value has no data (length=0), it is displayed as empty.
simplyfied win-3.?? registry: =============================
+-----------+ | next rec. |---+ +-----> +------------+ | first sub | | | | usage cnt. | | name | | +--> +------------+ | | length | | value | | | | next rec. | | | text |-------> +-------+ +-----------+ | | | name rec. |--+ +------------+ | xxxxx | +------------+ | | value rec. |--------> +------------+ +-------+ v | +------------+ | usage cnt. | +-----------+ | | length | | next rec. | | | text |-------> +-------+ | first sub |------+ +------------+ | xxxxx | | name | +-------+ | value | +-----------+
greatly simplyfied structure of the nt-registry: ================================================
+-------------------------------------------------------------------------+ v | +---------------+ +-------------> +-----------+ +------> +---------+ | | "nk" | | | lf-rec. | | | nk-rec. | | | id | | | # of keys | | | parent |---+ | date | | | 1st key |--+ | .... | | parent | | +-----------+ +---------+ | suk-keys |-------+ | values |---------------------> +----------+ | sk-rec. |---------------+ | 1. value |--> +----------+ | class |--+ | +----------+ | vk-rec. | +---------------+ | | | .... | v | | data |--> +-------+ +------------+ | +----------+ | xxxxx | | class name | | +-------+ +------------+ | v +---------+ +---------+ +-----> | next sk |---> | next sk |--+ | +---| prev sk | <---| prev sk | | | | | .... | | ... | | | | +---------+ +---------+ | | | ^ | | +--------------------+ | +------------------------------------+
--------------------------------------------------------------------------------
hope this helps.... (although it was "fun" for me to uncover this things, it took me several sleepless nights ;)
b.d.
相关推荐
Windows 98的物理文件构成 Windows 98注册表的物理文件构成比较简单,是由两个...默认的情况下,User.dat以及System.dat存放在Windows 98安装目录中(比如C:\Windows文件夹中),但是 这两个文件可以存放在不同的地方
Windows操作系统的注册表是帮助Windows操作系统控制硬件、软件、用户环境和Windows操作系统界面的一套数据文件,注册表包含在Windows操作系统的安装目录下两个文件system.dat和user.dat里,还有它们的备份system.da...
Windows注册表是帮助Windows控制硬件、软件、用户环境和Windows界面的一套数据文件,注册表包含在Windows目录下两个文件system.dat和user.dat里,还有它们的备份system.da0和user.da0。通过Windows目录下的regedit....
REG注册表文件编写全攻略,Windows 中的注册表文件( system.dat 和 user.dat )是 Windows 的核心数据库,因此,对 Windows 来说是非常重要的。通过修改注册表文件中的数据,可以达到优化 Windows 性能的效果。
其中注册表数据库包括两个文件:System.dat和 User.dat。前者是用来保存计算机的系统信息,如安装的硬件和设备驱动程序的有关信息等;后者则是用来保存每个用户特有的信息,如桌面设置、墙纸或窗口的颜色设置等。它们...
Windows注册表是帮助Windows控制硬件、软件、用户环境和Windows界面的一套数据文件,注册表包含在Windows目录下两个文件system.dat和user.dat里,还有它们的备份system.da0和user.da0。通过Windows目录下的regedit....
CURRENT_CONFIG System、System.alt、System.log、System.sav、Ntuser.dat、Ntuser.dat.log HKEY_USERS\DEFAULT Default、Default.log、Default.sav <br>注册表的修改方法: 1,REGEDIT 2,INF文件 3...
SCANREG.EXE和SCANREGW.EXE是Win98新增的注册表检查器,它每天在启动Win98时会自动备份一个备份文件,其中包括system.dat、user.dat、win.ini、system.ini,它们都是采用CAB 压缩格式存放,保存在Win98 的SYSBCKUP...
3、注册表组成 在Windows中,注册表由两个文件组成: System.dat和User.dat,保存在Windows所在 的文件夹中。它们是由二进制数据组成,因 而无法用文本编辑器加以查看和修改。前者 ...
System.dat和User.dat,保存在Windows所在 的文件夹中。它们是由二进制数据组成,因 而无法用文本编辑器加以查看和修改。前者 包含系统硬件和软件的设置,而后者保存着 用户有关的信息,例如颜色方案、资源管理 器的...
IV:Open Inventor中使用的文件格式 IVD:超过20/20微观数据维数或变量等级文件 IVP:超过20/20的用户子集配置文件 IVT:超过20/20表或集合数据文件 IVX:超过20/20微数据目录文件 IW:Idlewild屏幕保护程序 ...
6 = 系统垃圾文件,C:\Windows\/C:\Windows\System32\,*.tmp/*._mp/*.log/*.gid/*.old/*.chk/*.bak,1,1 7 = 最近文档记录,C:\Documents and Settings\Administrator\Recent\,*,1,1 8 = 网络邻居记录,C:\Documents ...
(2)用于活动目录数据库的最小磁盘空间为200MB,另外还要有50MB的空间用于活动目录数据库的日志文件。% N, l3 [) D1 u9 r- R" {: `( U6 K - S P; `* |# m( E* Q$ E& U2 u (3)已做好了DNS服务器的解析。1 C. \( h3 k) ...